Hinged Aluminium Doors
Doors can be ordered with or without hinges.
Our online ordering system is designed to automatically select the correct number of hinges determined by the height, width and weight of the door.
Hinge Types
Hinges for Box Profiles
All 35 mm hinge holes will be drilled by Alsert Doors whether hinges are ordered or not. The default Hinge Hole drilling is 96 mm to centre from Top & Bottom and then evenly spaced in between unless otherwise specified.
The system will allow you to override the number of hinges and positions to suit your particular measurements. NOTE:- the hinge hole centre must be no less than 78mm from the corners of the door.
Cup hinges available in 95°, 110°, 120°, 155°, & 165°.
Hinges for Flat Profiles
Specially designed frame hinges can be slid to any position required. Only available in 95° clip-on. NOT suitable for any other hinge type.
Mitred PVC backing strip is supplied with flat profile doors. Installer to cut & insert backing strip on hinge style to suit hinge positions.
Touch to Open
Touch to Open fittings [No Handle] available for Full Overlay hinges.
Soft Close
Soft Close fittings available for all hinges.
Size Availability
All profiles/frames except 25 mm flat profile/frame:
- Minimum Height: 250 mm
- Maximum Height: 2400 mm
- Minimum Width: 150 mm
- Maximum Width: 800 mm
- Minimum Face Area: 0.06 Sq m
- Maximum Face Area: 1.8 Sq m, for laminated glass inserts: 1.56 Sq m
For 25 mm flat profile/frame only:
- Minimum Height: 250 mm
- Maximum Height: 2100 mm
- Minimum Width: 150 mm
- Maximum Width: 800 mm
- Minimum Face Area: 0.06 Sq m
- Maximum Face Area: 1.36 Sq m including laminated glass inserts
